Minimum balancing time – unique GREEN WEIGHT technology (wheel balancing with one weight in one cycle)

• The machine automatically calculates the weight of the load and the position inside the wheel in such a way as to eliminate the most harmful static imbalance and compensate for the moment imbalance as much as possible. This technology eliminates vibrations with one load better than traditional dynamic balancing with two loads due to more accurate elimination of static imbalance.
• 80% of wheels on civilian vehicles can be balanced using Green Weight technology.

ADDITIONAL REAR PANEL

• The cones and clamping sleeve are conveniently stored on special holders on the panel under the right hand. No need to reach for the cone on the table over the wheel.
• Complete protection from dirt.

AUTOMATIC INPUT OF DISTANCE AND DIAMETER WITH ELECTRONIC RULER

• Stellar is equipped with an electronic ruler for automatic input of distance and diameter.
• Compared to manual input, the use of an electronic ruler ensures high speed of operation and eliminates errors when entering wheel parameters.

Easy machine control – touch screen monitor

• New modern interface. You can control the machine by the usual touches of icons on the screen. To scroll and turn pages, just swipe your finger across the screen. No need to waste a single extra movement.
• Quick access to all the most important functions of the balancing machine from the main screen.
• The STELLAR interface stands out for its instant responsiveness and smooth animation without freezes or delays.
• Detailed live 3D models, large icons and a calm dark screen theme make balancing clear, intuitive and comfortable.

Analysis and control of the volume of work

• The machine generates a detailed report of balanced wheels and installed weights
• You can track the operating time, the size of the wheels serviced, the type of weights installed, and the weight of the weights.
• The report can be exported via QR-CODE on the screen (html or xlsx format)
• No need to waste time transferring the report via USB flash drive

Effective balancing of any wheels

• Allows servicing of passenger car wheels as well as light commercial vehicle wheels.
• Automatic input of wheel parameters for rims up to 28” in diameter.
• Balancing of any cast wheel in 1 cycle.

Easy machine control – touch screen monitor

• New modern interface. You can control the machine by the usual touches of icons on the screen. To scroll and turn pages, just swipe your finger across the screen. No need to waste a single extra movement.
• Quick access to all the most important functions of the balancing machine from the main screen.

Ultrasonic width measurement sensor

• The machine automatically enters the disc width. The ultrasonic sensor instantly reads the width when the casing is lowered. 
• The speed of balancing stamped wheels increases.

Up to 6 operators can work on the machine simultaneously.

• Up to 6 sets of wheels can be serviced simultaneously.
• The parameters of each set only need to be entered once.
• You can switch between sets with the press of a single button

Computerized optimization of the tire-disk position

• In case of large imbalance values, the tire-to-disk position optimization procedure can be performed. By rotating the tire relative to the disk according to the machine prompts, the mass of the installed loads can be reduced.
• The optimization procedure under the guidance of the machine is carried out faster and more accurately than manually.
• Guaranteed to achieve minimum static wheel imbalance in no more than two tire rotations.
• During long-term optimization, other wheels can be balanced on the machine by switching to another operator.