BLTPL-9S

Salient Feature:

  • Manual release from one side, just operate the handle on main column side to release safety lock.
  • Equip height limit switch to ensure the lifting height safely, prevent the vehicle roof from damaging.
  • Equalization of two steel cables force both sliding blocks to move synchronously, effectively prevent the vehicle from tilting.
  • Minimum height of the lifting pad is 110 mm, easily lift and suitable for low profile cars and SUV.
  • Equip aluminum motor and car door-opening protection as standard configuration.
  • Reliable oil cylinder, adopts chrome-plating honed
  • cylinder and piston rod, with Italian seals on hydraulic rams, ensure long service life
  • Passed 115% dynamic test and 150% static test

Specification

Feature
Manual release
Lifting Capacity
4000kg (8840 lb)
Lifting Height
1850mm (72.8″)
Machine Height
3605mm (141.9″)
Machine Width
3462mm (134.9″)
Power of Motor
2.2kw
Power Supply
20V/380V 1/3 PHASE
Rise Time
50s
Drop Time
22s

BLTPL-9AS

Salient Feature:

  • Manual release from one side, just operate the handle on main column side to release safety lock.
  • Equip height limit switch to ensure the lifting height safely, prevent the vehicle roof from damaging.
  • Equalization of two steel cables force both sliding blocks to move synchronously, effectively prevent the vehicle from tilting.
  • Minimum height of the lifting pad is 110 mm, easily lift and suitable for low profile cars and SUV.
  • Equip aluminum motor and car door-opening protection as standard configuration.
  • Reliable oil cylinder, adopts chrome-plating honed
  • cylinder and piston rod, with Italian seals on hydraulic rams, ensure long service life
  • Passed 115% dynamic test and 150% static test

Specification

Feature
Manual release
Lifting Capacity
4000kg (8840 lb)
Lifting Height
1850mm (72.8″)
Machine Height
3605mm (141.9″)
Machine Width
3462mm (134.9″)
Power of Motor
2.2kw
Power Supply
20V/380V 1/3 PHASE
Rise Time
50s
Drop Time
22s

BLTPL-XPR 10S

Silent Feature:

  • 10,000‐lb lifting capacity
  • Expandable top beam accommodates wide or narrow drive‐thru configuration
  • Double‐telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar Telescoping arm design for more versatile arm positioning
  • Single‐piece columns
  • Single‐point safety release
  • Drop‐end arms provide a lower pad height
  • Dual hydraulic direct‐drive cylinders
  • Oversized 53″ tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17″ x 19″ A36 steel base plate
  • Self‐lubricating dura‐glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3“
  • Automatic arm restraints
  • Heavy‐duty 1/2″ aircraft‐quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4‐piece 63mm stackable adapter set comes standard
  • Triple‐telescoping front arms
  • ALI Approved.

Specification

LiftingCapacity*​
10,000 lbs. / 4536 kg
*Max Capacity / Front Axle
5,000 lbs. / 2268 kg
*Max Capacity / Rear Axle
5,000 lbs. / 2268 kg
A - Height Overall: (*)
145" / 3,683 mm
B - Width Overall - NARROW CONFIGURATION
132" / 3,353 mm
B - Width Overall - WIDE CONFIGURATION
145" / 3,683 mm
C - Width Outside of Columns: (NARROW CONFIGURATION)
126-3/4" / 3,225 mm
C - Width Outside of Columns: (WIDE CONFIGURATION)
139-3/4" / 3,555 mm
D - Floor To Overhead Switch: (*)
141" / 3,581 mm*
E- Inside Columns: (NARROW CONFIGURATION)
105.5" / 2,680 mm
E - Inside Columns: (WIDE CONFIGURATION)
118.5" / 3,010 mm
F - Reach (Front Arm Min.):
27-1/2" / 698 mm
G - Reach (Front Arm Max.):
51-1/2" / 1,308 mm
H - Reach (Rear Arm Min.):
34" / 863 mm
I - Reach (Rear Arm Max.):
54-1/2" / 1,384 mm
J - Min. Pad Height:
4.25" – 6-3/4” / 108 mm
K - Rise:
69" / 1,753 mm
L - Max Lift Height (Screw Pad Only):
73" - 75" / 1,854 – 1,905 mm
M - Max Lift Height ( Screw Pad & 63mm Adapter)
75.5" - 77.5" / 1,917 mm – 1,968 mm
N - Drive-Thru Clearance: (NARROW CONFIGURATION)
93" / 2,362 mm
N - Drive-Thru Clearance: (WIDE CONFIGURATION)
106" / 2,692 mm.
Screw Pad Adjustment:
2” / 51 mm.
Motor (**)
220 VAC / 60 Hz / 1 Ph
Time of full Rise:
45 Sec
Max Load Per Arm:
2,500 lbs. / 1,134 kg

BLTPL-XPR 10AS

Salient features:

  • 10,000‐lb lifting capacity
  • Expandable top beam accommodates wide or narrow drive‐thru configuration
  • Double‐telescoping screw pads offer increased versatility
  • Added overhead safety shutoff bar
  • Exclusive Tru‐Metric arm design for more versatile arm positioning
  • 30° rotated Single‐piece columns
  • Single‐point safety release
  • Drop‐end arms provide a lower pad height
  • Dual hydraulic direct‐drive cylinders
  • Oversized 53″ tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17″ x 19″ A36 steel base plate
  • Self‐lubricating dura‐glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3“
  • Automatic arm restraints
  • Heavy‐duty 1/2″ aircraft‐quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4‐piece 63mm stackable adapter set comes standard
  • Triple‐telescoping front arms
  • ALI Approved.

Specification

LiftingCapacity*​
10,000 lbs. / 4536 kg
*Max Capacity / Front Axle
5,000 lbs. / 2268 kg
*Max Capacity / Rear Axle
5,000 lbs. / 2268 kg
A - Height Overall: (*)
145" / 3,683 mm
B - Width Overall - NARROW CONFIGURATION
137" / 3,480 mm
B - Width Overall - WIDE CONFIGURATION
145" / 3,683 mm
C - Width Outside of Columns: (NARROW CONFIGURATION)
133" / 3,378 mm
C - Width Outside of Columns: (WIDE CONFIGURATION)
141"/ 3,581 mm
D - Floor To Overhead Switch: (*)
141" / 3,581 mm*
E- Inside Columns: (NARROW CONFIGURATION)
104" / 2,642 mm
E - Inside Columns: (WIDE CONFIGURATION)
112" / 2,845 mm
F - Reach (Front Arm Min.):
23-1/2" / 597 mm
G - Reach (Front Arm Max.):
45-1/2" / 1,156 mm
H - Reach (Rear Arm Min.):
45-1/2" / 1,079 mm
I - Reach (Rear Arm Max.):
60" / 1,524 mm
J - Min. Pad Height:
4.25" – 6-3/4” / 108 mm
K - Rise:
69" / 1,753 mm
L - Max Lift Height (Screw Pad Only):
73" - 75" / 1,854 – 1,905 mm
M - Max Lift Height ( Screw Pad & 63mm Adapter)
75.5" - 77.5" / 1,917 mm – 1,968 mm
N - Drive-Thru Clearance: (NARROW CONFIGURATION)
94" / 2,388 mm
N - Drive-Thru Clearance: (WIDE CONFIGURATION)
102" / 2,591 mm.
Screw Pad Adjustment:
2” / 51 mm.
Motor (**)
220 VAC / 60 Hz / 1 Ph
Time of full Rise:
45 Sec
Max Load Per Arm:
2,500 lbs. / 1,134 kg

BLTPL-XPR 9SF

Salient features:

  • Manual release from two sides, double insurance self-locking protection device, safe and easy to operate.
  • Equalization of two steel cables force both sliding blocks to move synchronously, effectively prevent the vehicle from tilting
  • Minimum height of the lifting pad is 110 mm, easily lift and suitable for low profile cars and SUV.
  • Equip aluminum motor and car door-opening protection as standard configuration.
  • Reliable oil cylinder, adopts chrome-plating honed cylinder and piston rod, with Italian seals on hydraulic rams, ensure long service life
  • Passed 115% dynamic test and 150% static test

Specification

Model
BLTPL-XPR 9SF
Feature
Manual release
Lifting Capacity
4000kg (8840 lb)
Lifting Height
1800mm (70.9″)
Machine Height
2824mm (111.2″)
Machine Width
2576mm (101.4″)
Power of Motor
2.2kw
Power Supply
20V/380V 1/3 PHASE
Rise Time
50s
Drop Time
22s

BLFPHD-8AE

Salient Feature:

  • This is a four-post vehicle lift for alignment service with 3500 KG lifting capacity for main unit, 2000 KG lifting capacity for the rolling jack (optional).
  • 220 mm minimum height, 1750 mm lifting height for main unit, 490 mm lifting height for the rolling jack.
  • Adjustable width between two platforms suits for various vehicle’s track width.
  • Durable steel one-piece runway.
  • Mechanical lock engaged automatically during lifting process.

Specification

Model
BLFPHD-8AE
Feature
Manual unlock
Lifting Capacity
<3500 KG(7,716 lbs)
Lifting Height
<1750 mm(69”)
Platform Height
220 mm(8.7″)
Platform Length
<4250 mm(167″)
Drop Time
<30s
Rise Time
<30s
Power of Motor
20V/380V 1/3 PHASE
Power Supply
2.2kw

BLFPHD-9AE

Salient Feature:

  • This is a four-post vehicle lift for alignment service with 3500 KG lifting capacity for main unit, 2000 KG lifting capacity for the rolling jack (optional).
  • 220 mm minimum height, 1750 mm lifting height for main unit, 490 mm lifting height for the rolling jack.
  • Adjustable width between two platforms suits for various vehicle’s track width.
  • Durable steel one-piece runway.
  • Mechanical lock engaged automatically during lifting process.

Specification

Model
BLFPHD-9AE
Feature
Manual unlock
Lifting Capacity
<4000 KG(8,818 lbs)
Lifting Height
<1750 mm(69”)
Platform Height
220 mm(8.7″)
Platform Length
<4250 mm(167″)
Drop Time
<30s
Rise Time
<30s
Power of Motor
20V/380V 1/3 PHASE
Power Supply
2.2kw

Four Post Lift HD-9AE

The HD‐9AE four‐post alignment lift provides 9,000‐lbs. of lifting capacity to accommodate a variety of light duty trucks and automobiles. It features adjustable multi‐position leveling, integrated front radius plates, and rear slip plates making it alignment ready and compatible with all leading alignment instrumentation, including 3D and camera wheel alignment systems.

Salient Feature:

  • Spring‐loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.
  • A simple push‐button pneumatic lock release makes lowering operations simple and fast. Aircraft‐quality stainless steel and aluminum pneumatic cylinders will provide years of trouble‐free service.
  • A secondary lock system is on constant guard and acts as a slack‐cable device in the unlikely event of an unexpected cable failure.
  • Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure.
  • Features multiple adjustable height locking positions for variable‐height parking and infinite leveling.
  • A maintenance‐free electric hydraulic power system assures ultimate dependability.
  • All operator controls are conveniently located within easy reach.
  • Non‐skid runways provides maximum grip, even when the runway surface is wet or oily.
  • Multi‐caster slip plates in the back and radius plates up front allow for extremely precise, free‐floating wheel alignment.
  • Dual radius plate positions for better vehicle accommodation
  • Heavy‐duty stainless‐steel lifting cables provide a great balance of strength, abrasion resistance and fatigue
  • Dual‐hub cable sheaves reduce stress, fatigue and wear
  • Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.
  • The HD‐9AE features a single hydraulic cylinder hidden away under the runway for maximum
  • performance and reliability and minimum exposure to elements.
  • An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
  • A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.

Specification

LiftingCapacity*​
9,000 lbs. / 4082 kg.
*Max Capacity / Front Axle
4,500 lbs. / 2041 kg.
*Max Capacity / Rear Axle
4,500 lbs. / 2041 kg.
A - Height Overall: (*)
127" / 3226 mm
B - Outside Length
198” / 5029 mm.
C - Overall Length
224” / 5690 mm.
D- Height of Columns
88” / 2235 mm.
E - Min. Runway Height
6‐1/2" / 165 mm.
F - Max. Rise
70” / 1778 mm.
G-Max. Lifting Height
76‐1/2” / 1 943 mm
H- Width Between Columns
117" / 2972 mm.
I ‐ Runway Width
19” / 483 mm.
J ‐ Width Between Runways MIN
40" / 1016 mm
K ‐ Length of Runways
188" / 4775 mm
L ‐ Min. 4‐Wheel Alignment (*)
71" / 1803 mm
M ‐ Max. 4‐Wheel Alignment (*)
145" / 3683 mm.
N ‐ Max 2‐Wheel Alignment (*)
160” / 4064 mm.
Min. Wheelbase @ Rated Capacity
135" / 3429 mm.
Min. Wheelbase @ 75% Capacity
115" / 2921 mm
Min. Wheelbase @ 50% Capacity
95" / 2413 mm.
Min. Wheelbase @ 25% Capacity
80" / 2032 mm.
Locking Positions
12.
Lock Spacing
Every 4" / 102 mm
Time of full Rise:
60 Sec
Standard Motor (**)
220 VAC / 60 Hz. 1Ph.

Mid Rise – BLMD-7XP

Salient Feature:

  • This is a portable surface mounted scissor lift with 3000KG lifting capacity.
  • Double safety by equipped with both hydraulic lock and mechanical dual-gear safety-claw lock.

Specification

Model
BLMD-7XP
Feature
Pneumatic safety lock
Lifting Capacity
3000 KG(6,600 lbs)
Lifting Height
980 mm(38.6″)
Platform Height
180 mm(7.1″)
Platform Length
1870 mm(73.6″)
Drop Time
25s
Rise Time
25S
Power of Motor
20V/380V 1/3 PHASE
Power Supply
2.2kw

Mid Rise – BLMD-6XP

You haven’t experienced state-of-the-art portable lifting convenience until you’ve used the BendPak MD-6XP mid-rise scissor lift. This 6,000-lb. capacity portable mid-rise lift comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions and free set of truck adapters.

Specification

Model
BLMD-6XP
Feature
Pneumatic safety lock
Lifting Capacity
6,000 lbs. (2,724 kg)
Lifting Height
47" (1,194 mm)
Platform Height
4.75" (121 mm)
Rise Time
45 sec
Power of Motor
20V/380V 1/3 PHASE
Power Supply
2.2kw

Full Rise – BALPS-7EX

Salient Feature:

  • This is a surface mounted low profile scissor lift with 3000 KG lifting capacity.
  • 105 mm minimum height, 1850 mm lifting height.
  • Durable one-piece platform.
  • Pneumatic safety locking system.
  • Anti-surge protection.

Specification

Model
BL-B30Y
Feature
Pneumatic safety lock
Lifting Capacity
3000 KG(6,600 lbs)
Lifting Height
1850 mm(72.8″)
Platform Height
105 mm(4.1″)
Platform Length
1870 mm(73.6″) / 205 mm(80.7″)
Drop Time
55s
Rise Time
55s
Power of Motor
20V/380V 1/3 PHASE
Power Supply
2.2kw

Low Rise – BALRL-H30

Salient Feature:

  • This is a portable low profile scissor lift for tire changing and quick service with 2500 KG lifting capacity.
  • 100 mm minimum height, 620 mm lifting height.
  • Durable one-piece platform.
  • Mechanical safety locking system.

Specification

Model
BL – H30M
Feature
Mechanical safety locking system
Lifting Capacity
2500 KG(5,511 lbs)
Lifting Height
620 mm(24.2″)
Platform Height
100 mm(3.9″)
Platform Length
1400 mm(55″)
Drop Time
25s
Rise Time
25s
Power of Motor
20V/380V 1/3 PHASE
Power Supply
2.2kw

Wheel Alignment – BAAL-8ASL

Salient Feature:

  • This is a floor mounted large platform scissor lift with 3500 KG lifting capacity.
  • 330 mm minimum height, 1850 mm lifting height.
  • Suit for four wheel alignment, optional turntable.
  • Pneumatic safety locking system.
  • Anti-surge protection.
  • Durable one-piece platform.
  • Reserved tracks for rolling jack , ready for tire service.

Specification

Model
BAAL-8ASL
Feature
Pneumatic safety locking system
Lifting Capacity
3500 KG(7,716 lbs)
Lifting Height
1850 mm(72.8″)
Platform Height
330 mm(13″)
Platform Length
3500 mm(137.8″)
Drop Time
55s
Rise Time
55s
Power of Motor
20V/380V 1/3 PHASE
Power Supply
2.2kw

Wheel Alignment – BAAL-9ASBL

Salient Feature:

  • This is a flush mounted large platform scissor lift with 3500/4000 KG lifting capacity.
  • 330 mm minimum height, 1850 mm lifting height.
  • Suit for four wheel alignment, optional turntable.
  • Pneumatic safety locking system.
  • Anti-surge protection.
  • Durable one-piece platform.
  • Built-in central jack lift up to 450 mm high.

Specification

Model
BAAL-8ASBL | BAAL-9ASBL
Feature
Pneumatic safety locking system
Lifting Capacity
3500 KG(7,716 lbs) | 4000 KG(8,818.5 lbs)
Lifting Height
1850 mm(72.8″)
Platform Height
330 mm(13″)
Platform Length
4000 mm(157.5″) – 4500mm(177″)
Drop Time
55s
Rise Time
55s
Power of Motor
20V/380V 1/3 PHASE
Power Supply
2.2kw

Alignment Scissor Lift – BAAL-9ASBLPL

Salient Feature:

  • This is a flush mounted large low height vehicle lift for alignment service with 4000 KG
  • Lifting capacity for main unit, 2000 KG lifting capacity for the rolling jack.
  • 245 mm minimum height, 1750 mm lifting height for main unit, 490 mm lifting height for the rolling jack.
  • Adjustable width between two platforms suits for various vehicle’s track width.
  • Durable steel one-piece runway.
  • Mechanical lock engaged automatic lifting process.

Specification

Model
BAAL-9ASBLPL
Feature
Pneumatic / Electric safety locking system (option)
Lifting Capacity
4000 KG(8,840 lbs)
Lifting Height
1850 mm(72.8″)
Platform Height
128 mm(4.4″)
Platform Length
4500 mm(177″) – 5000 mm(196.9″)
Drop Time
75s
Rise Time
60s
Power of Motor
20V/380V 1/3 PHASE
Power Supply
2.2kw

T&B Column Lift – BAPLC-PCL-18B (Set of 6)

Set of 6 Mobile Column Lifts

With 6 mobile column lifts in a single setup, you have the ability to lift up to 108,000 lbs. Despite so much lifting power, each column is easy to stow away in minutes flat after the vehicle is lowered. Safety and user control is paramount, so all lifts will be connected via a single control panel and can be stopped simultaneously with the push of a button.

Specification

Lifting Capacity
118,000 lbs. (8,165 kg)
Overall Height (RAISED)
101” (2,565 mm)
Overall Height (LOWERED)
146.5” (3,721 mm)
Max. Lifting Height
71.5” (1,889 mm)
Overall Depth
48.75” (1,238 mm)
Overall Width
45” (1,143 mm)
Chassis Length
32.25” (819 mm)
Min. Lifting Fork Width
9.5” (241 mm)
Max. Lifting Fork Width
35” (889 mm)

T&B Column Lift – BAPLC-S50/S75 ECO

This BAPCL-S50 & S75 mobile column lift system comes in a set of 4. When combined, the system lifts ideal for two-axle vehicles. Sets of 2, 6 and 8 are also available.

Specification

Model
BAPLC-S50ECO | BAPCL-S75ECO
Lifting Capacity
≤5000kg(1,1050 lbs) | ≤7500kg (16,575 lbs)
Lifting Height
≤1500mm (59″)
Platform Speed
≤0.6m/min
Package Size
112*110*260 (44 x 43 x 10)
Single post weight
580 (1282 lbs) | 800 (1768 lbs)
Power
3 | 4
Optional power supply
380v(3ph)
Control voltage
24s

Washing Lift- BWL-H 4

Feature

  • Plungers are of high grade steel manufactured to close tolerance with hard chrome plating for high wear resistance and good finish
  • Outer cylinder coated with Fiber Reinforced Plastic protecting it against corrosion
  • Uniquely designed wiper rings prevent entry of water and dust into the Hoist cylinder
  • Gland rings used in the plungers are designed for enhanced performance
  • Heavy duty rigid ramps accommodate a wide range of vehicles of varying size and type

Specification

Model
BWL-H4
Capacity
4 Ton
No. of plunger
Single
Plunger Dia
270
Air pressure in kg/cm2
09 / 12 / 10
Oil Required
160 ltr
Tank Capacity in litres
160
Tank Hydraulically Tested
22kg/cm2
Lifting height in mm
1500
Ramp size
175 x 85 x 4500

Washing Lift- BWL-B 4

Feature

The Hydraulic Lifts function when the downward motion of the plunger assembly causes displacement of oil through the metering tube holes and decelerate the impacting mass. The measure of the lift’s high performance depends on the displacement of oil and that of the buffer depends on the size and distribution of these holes. The gas spring ensures the re-extending of the plunger and the frictional forces check whether this re-extending of the plunger has been achieved.

Specification

Model
BWL-B4
Plunger dia
270 mm
Capacity
4 Tons (4000 kg)
Max. Lifting Height
1500 mm
Operating pressure
8-10 kg/cm2
Oil fitting capacity
150 l
Overall frame length
4500 mm
Overall frame width
700 mm
Scroll to Top